27 Jan 2017

New Product Announcement from Sciemetric Instruments

New Product Announcement from Sciemetric Instruments
Sciemetric Instruments has released the Model 3675, a turnkey station to boost the speed and accuracy of leak testing.

The 3675 can combine up to three of Sciemetric’s 3520 Series Leak Test units in one stand, controlled by a single sigPOD controller. This turnkey station can be used to conduct a range of leak tests, including pressure decay, mass flow and more with pressure or vacuum. It can be used in production, in a lab or wherever leak testing must be conducted.

The 3675 can be customized to accommodate plant requirements, including any geometric concerns (i.e., orientation) with the leak tester and the tested part. This can include remote mounting of the 3520 Series units, pneumatic connection kits and more.

All this capability is delivered in a small footprint. Its T-frame construction stands 28”D X 33”W (at wings) X 62”H. The 3675 adds to Sciemetric’s family of leak test systems to provide customers with greater flexibility to serve various needs and budgets. If you or your associates would like more information on this leak testing system, please contact us.
Author: Cynthia
0 Comments

6 Sep 2015

Success Stories

Success Stories

The Challenge:

A major Japanese automotive manufacturer has a ferrous metal casting operation where post process silica sand with ferrous metal content is fed into containers and shipped to area landfills.

The company’s environmental (green) policy and Kaizen Zero Waste initiative encouraged them to explore options extracting the metal particles from the silica sand. The customer estimated that as much as 10% of the total compound contained metals.

0 Comments

5 Sep 2015

Success Stories

Success Stories

Off-road Vehicle Differential Gearbox Noise and Functional Dynamic Test

The Challenge:

A unit of a major Tier 1 automotive supplier needed to upgrade their off-road leisure and utility vehicle differential NVH (Noise, Vibration and Harshness) test station. The existing PLC/PC controlled test station was a combination of vendor supplied hardware and internally supplied controls and software.  The controls engineer responsible for its programming and maintenance was relocated and the plant no longer had knowledge of the equipment operation to have confidence in the test data. A Dempsco sales engineer, who was in the plant on another project, discussed the current NVH test station issues with the customer and laid out a plan to explore development of a new test station. A key was to be able to find defective gears, bearings, and other internal components based upon unique noises which could be “heard” electronically and identified automatically while running the product on a dynamic test stand.

0 Comments

5 Sep 2015

Merwin Award!

Merwin Award!

Dempsco was honored in 2014 to receive Eriez' highest distinction... the Merwin Award!
In the words of C. H. Ingram, Vice President of Sales & Marketing, "… the Merwin Award is confirmation of the excellent way in which they represent Eriez and serve our mutual customers in the Metalworking Market."

The Merwin Award, established in 1994, is best reflected by the plaque's inscription, which reads:

Presented for outstanding contributions to the advancement of the ideals and mission of ERIEZ MAGNETICS using the Golden Rule as a guide exemplified by superior sales performance, providing our customers high quality service and support, and striving to conduct affairs in an efficient, capable and friendly manner.

0 Comments
RSS
123456